Each of the 83 glass leaves is suspended on its own independent steel wire, and each wire length can be set individually during installation — no tools required. By raising or lowering individual wires, an installer or interior designer can sculpt the overall silhouette of the chandelier: a flat horizontal cloud, a cascading conical form, a cresting wave, or any custom profile. The adjustment is done once at installation and remains fixed. If you want to reshape the fixture after installation, each wire can be re-adjusted in place. Our design team can provide a wire-length map for a specific silhouette if you share your ceiling dimensions.

The standard configuration drops 200 cm (78.7 inches / 6.5 feet) from the ceiling. To hang comfortably above head height in a living or dining area, a minimum ceiling height of 14 feet (4.3 m) is recommended — this gives approximately 6 feet of clearance below the lowest leaf position. For hotel lobbies, grand foyers, and double-height spaces of 16–24 feet, the full sculptural cascade reads at its most dramatic. Wire length is extendable on request if your ceiling is unusually high.

Yes — the Floating Leaves is designed for exactly this scale of installation. Its 47.2-inch (120 cm) canopy diameter, individual leaf adjustment, and customizable scale make it well suited for boutique hotel lobbies, resort reception areas, luxury spa atriums, and fine dining environments. For commercial projects, we can customize the leaf count, canopy diameter, glass color combination, and wire lengths to match a specific space plan. Contact our team with your project brief and ceiling drawing for a custom specification.

The Floating Leaves uses 21 integrated LED spotlight modules — these are non-replaceable under normal use conditions and are rated for extended operational life. The fixture connects to a standard wall switch; if dimming is required for a hospitality or residential project, confirm LED dimmer compatibility with our team before ordering. For large hotel and resort installations where long-term maintenance planning is required, request the full specification sheet via email.

Due to its scale and the number of individual glass elements, the Floating Leaves Chandelier requires professional installation by a licensed electrician experienced with large-format decorative lighting. The ceiling must have a structurally reinforced mount point capable of supporting the total fixture weight — a standard residential junction box is insufficient. For new construction or renovation projects, rough-in a dedicated chandelier support box or beam tie-point. Our installation guide (available via email) includes a ceiling reinforcement specification and wire-hanging sequence.