✅ REPLACE CLAY BAR: Clay bars are labor intensive, expensive, and time consuming. The Nanoskin Autoscrub is easier to use than a clay bar, lasts many times longer than a clay bar, and uses less effort and time to exfoliate and decontaminate surfaces before wax and coating process.
✅ REPLACE CLAY BAR: Clay bars are labor intensive, expensive, and time consuming. The Nanoskin Autoscrub is easier to use than a clay bar, lasts many times longer than a clay bar, and uses less effort and time to exfoliate and decontaminate surfaces before wax and coating process.
✅ SURFACE DECONTAMINATION: When used with the proper lubricant, the Nanoskin Autoscrub can be used to decontaminate painted surfaces, glass, plastic, metal & more. Contaminants such as brake dust, industrial fallout, rail dust, overspray, and tree sap will be efficiently shoveled out using the Nanoskin Autoscrub.
✅ EXFOLIATION PROCESS: Using Autosrub is like a process wherein your skin’s dead cells are removed from your epidermis. The patented Autoscrub plays a key and crucial step before any paint correction, waxes, sealants and /or ceramic coating to achieve optimized performance.
✅ FAST & DURABLE: The Nanoskin Autoscrub performs work up to 3X faster and last up to 10X longer than traditional clay bar. No need to stop, fold, and reform like clay bar. Just keep working without interruption with Nanoskin Autoscrub. When Autoscrub accidentally dropped on the floor, simply rinse with water and continue.

NANOSKIN AUTOSCRUB System works fast and achieves professional results with the new advanced rubber polymer technology, which replaces the use of clay bars. It safely and easily removes paint over spray, water spots, fresh tree sap, rail dust and other bonded surface contaminants from the surface of automotive paint, glass, moldings and plastic. Unlike the clay bar, the AUTOSCRUB can be cleaned by simply rinsing off the accumulated contaminates with water. If you drop the AUTOSCRUB on the ground, no worries, just rinse the sponge pad clean and you're ready to keep using it. Easy glides allows for sturdy and controlled handling, unlike clay bars where constant reshaping is required.

Application Use:
• For surface prep., use with NANOSKIN GLIDE Instant Spray Lubricant
• To achieve best result on the paint, use with NANOSKIN NANO SHOCK Hydrophobic Spray Lubricant Sealant.
• For glass prep. and hydrophilic anti-static sealant, use with RAIN PREP Glass Cleaner/Activator then follow with RAIN Glass Sealant.

NOTE:
Sufficient lubrication is crucial to the AUTOSCRUB application.
Plain water is NOT an adequate lubricant.
AUTOSCRUB is not solvent resistant.
Remove tar & grease before application

Helpful Tips:
The AUTOSCRUB has a protective coating to ensure stability within transportation.
To break in the pad, moisten the AUTOSCRUB with desired lubricant.
Moisten a portion of window glass or other glass surface. Rub AUTOSCRUB in circular motion against the glass for 30~60 seconds. You may see a white soapy foam. This is the protective sealant coming off. Don 't use until the polymerized rubber is soft and slightly tacky.
Cold temperatures may stiffen pad. Warm surface before using.
There is a significant difference between NANOSKIN AUTOSCRUB and clay bars. An outstanding machine/advanced polymer combination makes AUTOSCRUB the best contamination removal tool ever.

Compare with clay bars:

DIRECTIONS for use Directions:

Step 1: Spray sufficient amount of lubricant on the vehicle glass surface Note: Do not allow the lubricant to run dry on the surface.

Step 2: Slide Autoscrub across the lubricated surface in a back and forth motion with light to medium pressure. NOTE: Work in a 12"x 12" area at a time. Do not allow lubricant to dry on the surface.

Step 3: Wipe and buff dry residual lubricant off the surface using light pressure.

FOLD AUTOSCRUB TO KEEP CLEAN UNTIL NEXT USE

TechnicalInfo Contains:
Coming soon...