• Sold as a set of four (only two are needed per vehicle)
• Printed series contains custom colors like Type S Red
• Installation video below

2023+ Acura Integra Front and Rear Bumper Insert Overlays / Inlay

The new Integra truly is great!  However to make the logo out, you have to get these inserts!  Customize your color.  Choose choose between standard off the shelf color (standard vinyl) or our completely unique options (printed series).

NOTE:  Fits all 2023+ Acura Integra including Type S.

If you don't see a color or design that you wanted, just ask for it!  Comes with 4 sets of logos (2 backups, enough for two full vehicles actually!).

INSTALLATION

Clean the application area to prepare it for installation.  Ideal install temperature is between 75-85 degrees.  Do not install on a warm bumper or in direct sunlight unless it is cool outside.  Our install video documents all the possible tips we could imagine.

Some will choose to clean the application area with rubbing alcohol which is okay.

"Rubbing alcohol will not damage car paint if it is diluted to between 10% and 15%. Since rubbing alcohol evaporates quickly, it doesn't damage car paint."

• Microfiber
• Detailing Spray
• Heat Gun or Hair Dryer
• Small screwdriver or toothpick

You will be installing these letter by letter.  Please zoom into our photos to see where we placed them.  We used a small screwdriver (placed them on the tip) to transfer them over to their spot and then pushed down with our fingers.  Then we carefully used the screwdriver to put pressure on them as well.

It was a warm day and we were able to use an automatic car wash on the vehicle 4 hours later. 

Installation Video