Master Tailgaters Replacement for Lexus IS 200t (2015-2017), IS 250 (2014-2017), IS 300 (2015-2018), IS 350 (2014-2018) Backup Camera OE Part # 86790-53040 

Replaces Model Number: 86790-53040

For use with:

• Lexus IS 200t (2015 2016 2017)
• Lexus IS 250 (2014 2015 2016 2017)
• Lexus IS 300 (2015 2016 2017 2018)
• Lexus IS 350 (2014 2015 2016 2017 2018)

This is an aftermarket backup camera, not OEM. This camera will plug into your existing wire harness. If your vehicle currently does NOT have a backup camera system, this camera will not work. Double Check your part number prior to ordering.

STEP ONE: CALL
Before ordering this item:
First, you need to call the Parts Department of your local dealer to find out your exact Part Number.

STEP TWO: CHECK
Double check your Part Number with our part number to confirm.

• Oftentimes, people buy the wrong camera because they only match the model/year of their car.
• To avoid this, you just need to compare your part number to this one and make sure they match!

STEP THREE: PURCHASE
Once you complete steps ONE and TWO, and confirmed a match, you can purchase this camera without having to worry about whether or not it will work for your vehicle!

Camera Specs:

• Sensor: ¼” On-Semi (USA) CMOS Active Pixel Array, Lens: Nidec (Japan) (Glass + Plastic)
• Minimum Illumination : .1 Lux light sensitivity
• Signal System : NTSC/PAL
• Effective Pixel : 728 x 582
• Electronic Shutter : 1/50 to 1/100,000 seconds
• Resolution : 600 TV lines
• Angle : 170 Degrees
• Waterproof Rate : IP68
• Power : DC 6v-12v
• Video Cable: 6.5 inches

**ATTENTION: Before purchasing, make sure to call your local dealer to verify that your part number is an EXACT MATCH to this part number*
[For use with]: Lexus IS 200t (2015 2016 2017), IS 250 (2014 2015 2016 2017), IS 300 (2015 2016 2017 2018), IS 350 (2014 2015 2016 2017 2018) OE Part # 86790-53040 (8679053040)
[Camera]: Wide angles up to 168°(Diagonal) + 100°(Vertical) + 136°(Horizontal); Designed for low light to .1lux
[Specs] Up to 800TVL; Waterproof to IP69K; Safe working temp from -104F to 220F. Japanese Nidec Lens, OnSemi USA Chip
[Plug and Play]: Plugs into Existing OEM Video Harness, no programming required