Will this wing mount using factory trunk lid holes?

The J Spec wing is engineered for standard mounting point compatibility. Before drilling, verify your trunk lid hole locations and measure the spacing against the wing's base plate. This confirms proper alignment without modification.

Does the wing create trunk lid interference when fully closed?

The three-piece design allows you to test fit and adjust clearance before final fastening. Check the gap with the lid fully closed and latched. If you encounter contact, you can shim or adjust mounting depth—standard procedure for most aftermarket wings.

What surface prep is required before painting?

Sand the surface with appropriate grit to promote paint adhesion and remove any shipping dust. Apply primer and your chosen topcoat per your paint manufacturer's instructions. This ensures a finish that lasts.