Does dry carbon need a clear coat?

Yes. Dry carbon ships uncoated to preserve the authentic weave texture and allow you to choose your finish. Apply UV-protective clear coat after sanding and prepping the surface — this protects the resin from yellowing and locks in the look you want.

What's the difference between dry and wet carbon?

Dry carbon is raw, unfinished material with visible twill weave and requires you to seal it with clear coat. Wet carbon comes pre-sealed with a glossy factory finish and is ready to bolt on. Dry finishes cost less and let you customize the topcoat; wet finishes save prep time.

How do I seal the edges to prevent delamination?

Sand the edges smooth and round sharp corners slightly before applying your final clear coat. Extend the clear coat over all edges — this prevents moisture from wicking into exposed resin at the perimeter. A full topcoat system (primer, base, clear) will protect the entire piece, including the seams.