• Topographic map with distinct contour lines
• Install videos below

2025+ Toyota 4Runner Rear Topographic Map Overlay Kit V2

This topographic map look great in the rear windows of the Toyota 4Runner.  It's a theme tons of off-roaders have embraced as we set off across the country, enjoying, roads, ruts, trails, beaches, and more. 

NOTE:  This comes as a left and right pair.  

Install Video

This installs in a similar manner as our fully printed overlays.  We will be doing a wet install.

NOTES:  We recommend that the installation area be free of wax and not under direct sunlight (70-80 degrees).  Wash the vehicle or clean the glass and surrounding trim.

• Microfiber
• Glass cleaner
  
• Soapy Water (we recommend our StickerFab Installation Fluid)
• Heat Gun or Hair Dryer (optional)

3 item kit (microfiber, installation fluid, squeegee)

Wet Install

This is a vehicle specific video.  Please watch our 4Runner specific tips video first and then watch the Land Cruiser install which is similar.  For this, you would use our StickerFab application fluid or a few drops of dish soap mixed with a cup of water.  Test you mixture and add more dish soap if needed. 

Because the 4Runner is a curved window AND the design contains smaller lines, we recommend 70-80 degree install temperature, in the shade, and keep the window EXTREMELY wet with your application fluid or fluid mixture.  DO NOT DIRECTLY wet the vinyl on the transfer paper because the line design is much smaller than the Land Cruiser design.  It will cause the vinyl to separate from the transfer paper prematurely.