Nanoskin First Cut is the first step compound to remove sanding marks, oxidation and paint defects from all automotive paints. Its unique combination of diminishing gentle abrasives, fine polishing powders, and chemical cleaning agents, deliver a low dust application. The perfect first step when followed by Nanoskin Compolish Ultra Fine Polishing compound. Nanoskin First Cut contains no silicone, no wax, and no fillers.

WARNING: This product can expose you to Ethyl Benzene, Naphthalene, and Toluene which is known to the State of California to cause cancer, birth defects, and reproductive harm. For more information, go to www.P65Warnings.ca.gov
DIRECTIONS for use Directions:
Shake well. Use only on clean, cool paint and out of direct sunlight.

Hand-
• Apply a small amount to a soft cloth and rub on the surface until the scratches are removed..
• Wipe off residue and apply wax or glaze.

Rotary Polisher-
Apply a small amount to the surface.
Buff with a wool or foam pad at a low rpm.
Slightly tilt up the pad and buff from side to side to remove scratches.
Wipe off residue and apply wax or glaze.

DA or Orbital Polisher-
Apply a small amount to the surface and polish until swirls are removed.
Wipe off residue and apply wax or glaze.

TechnicalInfo Contains:
Coming soon...